Since when has Butzbach been manufacturing the high-speed door ECOSPRINT?
The ECOSPRINT has been in our production line since Spring 2002.
How fast does the door open resp. close?
The opening speed is 3 m/s and the closing speed is 1.6 m/s.
Up to which sizes can the ECOSPRINT be manufactured?
Door systems up to 3.50 m wide and 3.50 m high are manufactured to the millimetre.
Can the door system be utilised for renovations?
YES – low impact, primarily towards the floor due to the self-supporting door construction. Individual problem-free adaption to the local conditions is possible.
Where can the high-speed door ECOSPRINT be utilised?
The ECOSPRINT was specially designed fort he interior, for use without wind or pressure impact.
Lateral (horizontal – towards the sides) opening principle – why?
Safety Aspect:
- immediate access of the entire opening height;
- no dangerous pivoting
Hygienic Aspect:
- no soil particles dropping down (like e. g. with vertically opening doors);
- no direct contact with the goods (like e. g., swinging doors, strip curtain)
Which kind of maintenance and service is recommended?
For the permanent functionality of the door system, we recommend annual standard maintenance or after 30.000 opening cycles, carried out by our in-house service team.
Is a safety inspection of the door system necessary?
YES – once a year the employer's liability insurance association demands a UVV test (regulations for accident prevention) according to BGR 232. Our authorized service team is qualified to conduct the test.
Length and extent of guarantee?
According to VOB 2002/B. With conclusion of a maintenance contract: 4 years on static parts and moveable parts, with exception of wear parts. Without conclusion of a maintenance contract : 4 years on static parts and 2 years on moveable parts.
Can the door still be operated in case of power failure?
YES – upon using the emergency opening, the door is opened quickly and problem-free with spring power (automatic triggering= optional).
In which colours is the ECOSPRINT obtainable?
The standard surface of the door frame is blank aluminium – powder coating in all RAL colours is possible. The standard colour of the door skins is signal yellow with transparent panels at eye-level. Further colours are naturally available.
How can the ECOSPRINT be actuated?
The standard equipment is Einfachtaster - prepared for all regular pulse transmitters (e. g. mushroom buttons, pull switches, radar motion sensing device, reflection light scanner, induction loops, radio control and traffic lights, etc.).
Which kinds of passage control variants are there?
Serially, the door closes within an individually configurable period. Due to the light curtain in the closing edge, no additional passage control is required.
What is included with the stacking door?
- delivery of the door system and the accessories free installation site
- installation according to the volume of the order
- function test of the door system
- instruction of a responsible person
Which scope of service does Butzbach offer?
Consultation (unconditionally beginning in the planning phase), construction, production, delivery, installation, final inspection with turnover, and after sales service. Project support from A to Z by our in-house staff – the only way we can make sure that our customers are completely satisfied.
How long is the required delivery period?
Our standard delivery period is between 6 to 8 weeks, depending on the season. Individual delivery arrangements are available on request!
How is the door system sealed?
There is a special plastic strip between the building and the door frame, between the door skin and the door frame a brush seal.
Which kind of safety features does the ECOSPRINT have?
- light curtain in the closing edges controls the non-contact protection system.
- transparent panels at eye-level
How can the ECOSPRINT door skins be cleaned?
Soiled door skins can be washed with water and standard detergents. Please do not use solvents!
Where is the ECOSPRINT fixed?
Depending on the on-site situation, the door frame is installed either behind or directly in the reveal (making the entire opening width accessible).
Which kind of material is used for the door skins?
The 1 mm door leaves are made of polyester fabric, laminated on both sides with PVC; thus achieving high resistance to folding and tearing.
What kind of supporting construction is needed to attach the door system to?
Since the door has a self-supporting construction, no load bearing walls are needed (ideal for renovations).
How much space is necessary for the installation of the ECOSPRINT?
The space required to each side is 330 mm and 225 mm in the lintel area.
Which general impact is put on the building?
The door system can be installed in any building without hesitation (ideal for renovations) The self-supporting door frame is positioned on the hall floor, which transfers the weight into the foundation via the upright columns. Additionally, the high speed door is protected against toppling by fixings towards the wall – no load impact!