High-speed doors NOVOSPRINT®

Horizontal, fast & safe

The perfect high-speed door always moves in step with your work processes.

With its horizontal opening principle, the NOVOSPRINT high-speed door is the ideal solution for all companies that attach great importance on efficiency, profitability and reliable protection.

Butzbach developed this revolutionary high-speed door with the horizontal opening principle already more than 30 years ago.

Instead of rolling upwards, the tarpaulins of the two door halves roll to the side in a matter of seconds and immediately provide a clear view of the space behind them. The NOVOSPRINT high-speed door helps to reduce your operating costs to a minimum by consistently avoiding collisions. To emphasize the long-time quality of the door, we are able to guarantee 500,000 opening cycles during the first two years.

High-speed doors NOVOSPRINT®
For every requirement



The NOVOSPRINT Syncro is the double-leaf, synchronous and side-opening high-speed door. With spring force, both door leaves are opened simultaneously and rolled up in a compact upright profile. The NOVOSPRINT high-speed door reaches an opening speed of up to 5 m/s which is ideal for fast logistic processes, forklift traffic and air locks.



NOVOSPRINT Mono was specially developed as a one-sided rolling high speed door for narrow passages or very restricted space conditions. The door requires only minimal installation space and is ideal for narrow installation situations and highly frequented aisles. The door enables fast, unhindered and, if required, contact-free passage. In contrast to hinged and sliding doors, our door does not require any space for pivoting or parking areas.



NOVOSPRINT Duo has two independently controllable door leaves in one door opening. They enable the safe separation of vehicle and passenger traffic or, if required, can create a two-lane forklift lane. And whenever you need the entire door width, you can also roll both door leaves simultaneously at the push of a button. The NOVOSPRINT Duo can be retrofitted to existing buildings at any time and often saves the expensive installation of a separate passenger door.


High-speed doors NOVOSPRINT®
Your advantages

Very short opening and closing times
Collisions almost impossible
Less heat loss due to reduced opening and closing times
Extremely long lifetime
Low operating costs due to a minimum of wearing parts
No dripping of dirty water or particles on the goods (food)
No dangerous braking which increases safety at work
Smooth logistics processes
Guaranteed 500.000 opening cycles on the springs

High-speed doors NOVOSPRINT®
Our performances

Increased efficiency

With precisely adjustable opening times, the NOVOSPRINT high-speed door guarantees smooth-running logistic processes. The fast opening and closing times reduce air exchange, prevent unnecessary loss of heat and thus lower your energy consumption.

Increased profitability

NOVOSPRINT high-speed doors have been proven their durability and reliability around the world for years now. Even under the toughest conditions they can offer an extremely long lifespan with low maintenance costs. This way, NOVOSPRINT high-speed doors can support your logistics with millions of opening cycles.

Increased safety

NOVOSPRINT high-speed doors are the best choice for companies which attach great importance to safety and reliable accident prevention. Thanks to the simultaneous lateral rolling door leaves, the entire door height is available in a fraction of a second. The vision panel always remains at eye level. This way the driver can keep an eye on the door and the area behind the door at all times. This avoids dangerous braking and therefore collisions with the partially opened door leaf are almost excluded.

Do you need support in planning and designing your high-speed door?
Contact us!

High-speed-doors NOVOSPRINT®
Suitable for every application


Option ground closure

The NOVOSPRINT ground closure takes care that should be outside, stays outside. As soon as the door is in the closed position, the door leaves are lowered to the floor so that pests, draughts, dust and noise are kept outside.

Your benefits:

  • Rodents and insects are kept outside
  • Protection from draughts and dust
  • Ideal for the food industry or for cleanroom requirements
  • Compensates bumps up to 10 mm

Option crane rail

The lateral opening mechanism is ideal for manufacturing and logistic processes where goods have to be transported via crane rails. A cut-out creates a separation between two rooms without stopping the flow of goods. An activation sensor system opens and closes the high-speed door in perfect harmony with the transported goods.

Your benefits:

  • Fast and smooth-running thanks to lateral opening mechanism
  • Individually configurable activation sensors
  • For crane rails, roller conveyors, conductor rails and other transport systems

Option double-skin

If there are higher requirements for heat and sound insulation, NOVOSPRINT high-speed doors can be equipped with double-skinned door leaves. An (40 mm thick) air cushion of around improves both the heat and sound insulation.

Your benefits:

  • Increased thermal insulation
  • Increased sound insulation

Option sprint

The sprint model means your high-speed door can open at record speeds of up to 5 m/s. With an integrated light curtain, you can even maximise the closing speed to 2.5 m/s which is ideal when fast, highly manoeuvrable vehicles are operating in a small space.

Your benefits:

  • Maximum safety with high speed
  • Opening speed of up to 5 m/s
  • Closing speed of up to 2.5 m/s

Option hygiene

Whether it is used in the pharmaceutical industry, food industry or healthcare sector – the range of features available means that the NOVOSPRINT is able to fulfil all specific regulations in terms of cleanliness, freedom of pores, food safety and many other hygiene requirements. The lateral movement of the door leaves avoids the contact between door and floor, thus reliably preventing the transport of moisture and dirt when the door is opened.

Your benefits:

  •    The elementary components are made of stainless steel
  •     Easy cleaning due to flat surfaces
  •     Wet cleaning and disinfection possible
  •     No dripping of dirt on the goods due to the horizontal opening mechanism

Do you have any further questions?
We will be pleased to help you!

High-speed doors NOVOSPRINT® Technical data

TypeSyncroSyncro XLMonoDuo
Width min. - max. (for type "Duo" per side)1.000 - 5.300 mm3.800 - 9.000 mm 900 - 2.650 mm1.000 - 5.300 mm
Height min. - max.1.700 - 5.000 mm2100 - 6.000 mm1.700 - 3.500 mm1.700 - 5.000 mm
Material door leafPVC door skin single-walled with vision panelPVC door skin single-walled with vision panelPVC door skin single-walled with vision panelPVC door skin single-walled with vision panel
Opening principlehorizontal, double-wingedhorizontal, double-wingedhorizontal, single-wingedhorizontal, double-winged
synchronoussynchronousright or leftsynchronous
Lintel requirement min. / max.330 mm480 / 880 mm330 mm330 mm
Lateral space requirement min. (without control)350 / 350 mm525 / 525 mm350 / 135 ( 35 ) mm350 / 350 mm
Opening speed max. standard / (sprint)3,5 m/s ( 5 m/s )2 m/s1,75 m/s ( 2,5 m/s )3 m/s ( 5 m/s )
Resistance to wind load (width-dependent)class 0-2class 0-2class 0-2class 0-2
Option double-walled--
Option escape route (height max. 4m)
Option hygiene (Stainless steel door frame)--
Option sprint--
Combination with stacking and sectional door
Note : Not all options can be combined□ (possible)-- (not possible)05/ 2019

We are happy to advise you individually!

You might
also be interested in