High-speed door NOVOSPRINT Syncro

Ourfastest industrial door – the new NOVOSPRINT with electric drive

With its lateral opening technology, its opening speed of up to 5 m/s and its closing speed of up to 2.5 m/s the new NOVOSPRINT represents the reliable solution for a fast and safe passage traffic. In contrast to vertically opening doors the lateral opening technology gives immediate access to the entire height of the door. A collision with the door can effectively be avoided. This trouble-free traffic and material handling support avoids interruptions or expensive repairs on the doors.
NOVOSPRINT is an investment which pays off – by more efficiency in the intra-logistic processes, but also by more reliability and long life. This is what we assure you by guaranteeing 500 000 openings on the springs.



Improved safety and speed for intra-logistic processes:

  • Lateral opening of both door leaves simultaneously, thus half the opening time
  • Trouble-free traffic as the entire height is available immediately
  • Fast and safe traffic due to the high opening speed of up to 5 m/s, automatic closing after an adjustable delay, and closing speed up to 2.5 m/s: waiting and dangerous braking are avoided
  • Safe operation for staff, vehicles and the door itself due to multiple protective devices such as the opto-electronical safety edge, photo eye, light curtain, movement sensor or crash protection
  • Opening with spring force within fractions of a second, closing by electric motor
  • Transparent vision strip at eye level for continuous inter-visibility
  • Optional: Application in escape route

Ideal for climate locks:

  • Often material handling by forklift or manual transport is effected through climate locks, with one door at each end
  • Due to shortest opening- and closing times and adjustable open delays NOVOSPRINT minimises the entire lock passage time, waiting times and dangerous braking maneuvers are avoided
  • Short cycle times and lock effects reduce the air exchange, the loss of energy, and by avoiding air draft the health of the staff is protected

Very long product life even with intensive utilisation:

  • Guaranteed 500 000 openings for the first set of springs
  • Minimised wear and tear leading to efficient and economic continuous operation
  • Door leaves made of very tear-resistant polyester skin with PVC coating
  • Door frames in solid material for years of reliable intensive operation
  • Reduced cost for operation and maintenance

Easy installation:

  • Only little installation space at the side and on top is required
  • Self-supporting frame construction, attachment on the wall and on the floor simply by brackets
  • Ideal also for renovations or refurbishment of existing doors

Individual equipment:

  • Many design options for the perfect adaptation to the site of operation, also with coloured or printed skin
  • Single or double-skinned application, depending on the need for protection against noise, cold or wind
  • Many optional functions for each field of application
  • Comprehensive selection of sensors, activators, detectors: for each type of control the best suitable option is available

Technical data:

Performance data: Designed for … opening cycles per year 350.000
Guaranteed 500 000 openings of the door’s springs (first set of springs, max 2 years)
Opening speed* standard up to 3,5 m/s
Opening speed * SPRINT (only single skin) up to 5 m/s
Closing speed * standard up to 1,5 m/s
Closing speed * SPRINT (only with light curtain) up to 2,5 m/s
Operational forces / secure opening acc. to EN 13241-1 fulfilled
Wind load [km/h] / Beaufort class* up to 100 / 6-10
Dimensions: Clear width min. / max. [mm]* (max. reduced in case of special skin) 1000 / 5300
Clear height min. / max. [mm]* 1700 / 4500
Lintel height min. / max. [mm]* 330
Lateral space requirement [mm] drive side / non-drive side 350 / 350
Total depth [mm] 420 / 520
Frame: horizontal cross-beam, containing the drive technology: sheet metal, powder coated acc. to RAL 9005
Vertical jam, containing the fabric roll mechanism: sheet metal, Sendzimir-galvanised
Vertical jam, powder coated acc. to RAL 9005
Vertical steel profile, containing the seal and safety edge technology: sheet metal, Sendzimir-galvanised (single skin) resp. powder coated acc. to RAL 9005 (double-skin)
Cross-beam, jam and steel profile, powder coated in special colour acc. to RAL
Door skin: polyester fabric, PVC-laminated on both sides, yellow colour similar to RAL 1003. Vision element in a height of 1480 – 2000 mm
Door skin in special colour
PVC- free skin fabric (only for colour similar to RAL 1003)
Food-safe TPU coating, similar to FDA (only for colour similar to RAL 1003)
Skin with antistatic equipment (only for colour similar to RAL 1003)
Skin with low inflammability (building material class acc. to DIN 4102- B1)
Vision element in special height / special
Drive: Worm gear motor with double brake (WITH emergency release lever – closed without current)
Worm gear motor with double brake (WITHOUT emergency release lever – open without current)
BDC E800 F Frequency converter control for soft run and superior speed, 230V/50 HZ
Emergency operation: with Bowden cable – self-actuating opening
Self-actuating opening without current
Only valid for Germany: Doors for installation in escape routes and rescue paths, in correspondence with DGUV 208/044
Safety: Opto-electronical safety edge, integrated in the door leaf
Opto-electronical light curtain, integrated in the door leaf
External photo eye
External light curtain
Laser sensor
Crash-protection (stay bar with unlatch mechanism)
Additional equipment: Pulse transmitter – mushroom button / pull switch / radio transmitter / Infrared light sensor / Radar motion sensor / induction loop detector
Climate lock control
■=Standard / □=Option / *= depending on size and equipment
**test certificate available



Do you still have questions?

You are looking for a sales contact?

Just click here

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies. More information