Sectional doors SECTIOLITE®

Highly versatile

Thanks to its unique design, the SECTIOLITE sectional door has no springs, protruding hinges or spiral cables. Compared to conventional sectional doors, maintenance costs and downtimes are reduced to a minimum.

The solid guide tracks made of thick-walled aluminium are closed on three sides for providing maximum safety. The cover strips can be removed for maintenance purposes.

In the standard version, the SECTIOLITE sectional door runs parallel to the ceiling construction via a 90-degree deflection. Alternatively, we also offer the SECTIOLITE sectional door as a vertical lifting door or as rails guided along the roof. In this way we can adapt the opening principle of your SECTIOLITE door to your assembly situation.

Sectional doors SECTIOLITE®
Your choice

Sektionaltor SECTIOLITE, Fiberglas, Industrietor

SECTIOLITE ST40

The classic sectional door

With the classic SECTIOLITE ST40, the door sections are deflected when opening under the ceiling and guided into the hall interior. A lintel height of 350 mm is sufficient for this. If this is not the desired installation type, a vertical runner or the Variatne with higher guided deflection can also be installed.

Sektionaltor SECTIOLITE, Fiberglas, Industrietor

SECTIOLITE ST40T

Integrated entrance door

The self-supporting door can be used as an integral part of the operational pedestrian traffic thanks to its low, almost barrier-free threshold with a height of only 20 mm. At the same time, it optimally matches the external appearance and minimises energy loss.


For all requirements

Sektionaltor SECTIOLITE, Fiberglas, Industrietor

SECTIOLITE® Sprint

If 1.0 m/s are still too slow for you, the SECTIOLITE door can be executed with the "Sprint" option. A fast drive combined with an extra powerful frequency converter control ensures opening speeds of up to 1.5 m/s depending on the door size.

Your benefits:

  • Maximum safety at a high speed
  • Up to 1.5 m/s opening speed
Sektionaltor SECTIOLITE, Fiberglas, Industrietor

SECTIOLITE® Security

For highly senitive areas, the sectional door can be equipped with the "Security" option for an increased burglar resistance.

With this option, the SECTIOLITE door is one of the few doors on the market to achieve the resistance class WK3.

Your benefits:

  • Increased burglar resistance
  • Meets safety requirements resistance class 3 according to DIN V ENV 1627 : 1999
Sektionaltor SECTIOLITE, Fiberglasfüllung, Industrietor

SECTIOLITE® Storm

For installation situations in which the door is exposed to extreme wind loads, the SECTIOLITE door can be equipped with the Storm option. Depending on the width, the door can withstand wind speeds of up to 220 km/h.

Your benefits:

  • Can be opened and closed even during hurricanes (wind force 12)
  • Weather-independent operational reliability

Sectional doors SECTIOLITE®
Your advantages

Extremely long lifetime due to a sustainable material selection and conception
Extremely long lifetime due to a sustainable material selection and conception
No cost-intensive wear parts such as springs, spiral cables, etc.
No cost-intensive wear parts such as springs, spiral cables, etc.
Above-average wind load resistance
Above-average wind load resistance
High light transmission due to the fibreglass door infill
High light transmission due to the fibreglass door infill
High opening speed up to 1 m/s
High opening speed up to 1 m/s
The safety edge control stops automatically and reverses the door when it hits an obstacle
The safety edge control stops automatically and reverses the door when it hits an obstacle

Do you need support in planning and designing your industrial door?
Contact us!

Contact

Sectional doors SECTIOLITE®
Suitable for every application

Permanently reliable in extreme operating conditions
Hubtore SPACELITE, Fiberglas, Hubstaffeltechnik, geschlossen, platzsparend, Industrietor

Option wet room

With an additional package of features, the SECTIOLITE sectional doors can conquer even the toughest conditions, making them ideal for car washes – to name just one example. The doors can be integrated almost seamlessly from a visual perspective too, ensuring a harmonious building design.

The benefits:

  • Reliable protection from corrosion, water jets and dust
  • Some structural elements can be made from stainless steel or hot-dip galvanised
  • Additional sealing of fibreglass panels, door panels and controls

Video

Well protected from cold and draught
Hubtore SPACELITE, Fiberglas, Hubstaffeltechnik, geschlossen, platzsparend, Industrietor

Option thermal insulation

We equip your SPACELITE stacking doors with an additional insulation - inside the twin-walled fibreglass panels and within the frame profile. The improved sealing also ensures a very efficient protection against draughts.

Your benefits:

  • Improved thermal insulation with Ug values of up to 1,4 W/m²K
  • Improved thermal insulation with Ud values of up to 2,7 W/m²K
  • High light transmittance despite additional insertion foils in the fibre glass
  • Available for all SECTIOLITE lift gates and fibreglass installation thicknesses
For a safe passage
Sektionaltor SECTIOLITE, Fiberglas, Industrietor

Option personnel door

Under certain conditions, a separation of footpaths and driveways is constructive but not feasible. Do you still need a fully-fledged and safe passage for employees or customers?

We offer you a useful and high-quality solution - our integrated lpersonnel door with a low threshold!

We pay a lot of attention to uniform design, which is why the material and design of the sectional door and the personnel door are coordinated. Should you still have other specific wishes, we will be pleased to realise them.

Your  benefits:

  • Individual equipment of the door
  • Self-supporting, solid door construction
  • Low threshold with only 20 mm height
  • Overhead door closer already included in the standard configuration
  • All fitting versions can be realised
The easy way to multiply the available width
Hubtore SPACELITE, Fiberglas, Hubstaffeltechnik, geschlossen, platzsparend, Industrietor

Option movable mullion

Many of our customers are looking for generously designed industrial doors - a requirement that can be easily fulfilled by the flexible SECTIOLITE system in standard design up to 6m width easily meets.

A multiple door system can be the optimal solution for even wider passages. A movable mullion is located between the doors, which can easily be pushed to the side manually if necessary. In this way, the entire opening width can be used.

Your benefits:

  • Simple manual operation
  • Suitable for spatially limited lintel situations
  • For SECTIOLITE sectional doors in all sizes available
  • Extreme door widths can be achieved with standard door types
Your door as a bright business card
Sektionaltor SECTIOLITE, Fiberglasfüllung, Industrietor

Option laminated motifs

As we are the manufacturer of this unique infill material, we have the possibility of integrating picture motifs or logos directly into the fibreglass of your door. In this way you can´t only design your company building individually, you can also set effective light accents in the dark. Turn your stacking door into the luminous figurehead of your company!

Your benefits:

  • Picture motifs as advertising media
  • Individual design
  • Can be integrated on the full or partial door surface

We would be pleased to provide you with further information on our products.
Contact us!

Request material

You might
also be interested in

Sectional doors SECTIOLITE®
Technical data

Type ST40 ST40T (with pass door) ST40S (variant "S")
Width min. - max. 1.000 - 6.000 mm 2.500 - 5.500 mm 1.000 - 6.000 mm
Height min. - max. 2.100 - 5.000 mm 2.800 - 5.000 mm 2.000 - 5.000 mm
Leaf panel max. 450 kg 450 kg 450 kg
Single door panel height ca. 500 mm 500 mm 250 mm
Fibreglass door panel strength 40 mm 40 mm 40 mm
Lintel requirement min. standard / optional 800 / 350 mm 800 / 400 mm 800 / 350 mm
Opening speed up to 1 m/s 0,6 m/s 1,5 m/s
Certified sound insulation Rw up to 23 dB 24 dB 24 dB
Possible thermal insulation Ud 2,7 W/m²K 2,9 W/m²K24 dB 3,5 W/m²K
Resistance to wind load (width-dependent) Class 2-5 Class 2-3 Class 2-5
Air permeability Class 4 Class 4 Class 4
Resistance to water penetration Class 3 Class 3 Class 3
Protection against burglary WK3 -- --
Vision panel
Oval window -- --
Wet romm option ✓ / --
Fibreglass cover as lintel facing ✓ / --
Swivelling lateral element with or without door on request on request on request
Fix part with or without door in door look
Track laterally movable on request on request on request
Combination with high-speed door ✓ / --
Note: Performance data depend on equipment and size ✓ (possible) -- (not possible) 05/ 2019